View source for Install i@nseo/fr

{{Proofreading}}
<languages />
== Préparation de l'installation ==

i@nseo fonctionne comme un site web ; une pile dite AMP (Apache, MySQL, PHP) doit donc être installée au préalable. 

<hr>

=== Windows ===
Pour installer i@nseo sur un système d'exploitation Windows, suivez les étapes suivantes : 

* Téléchargez le logiciel depuis [https://ianseo.net/Releases.php ianseo.net]. La méthode recommandée consiste à télécharger le programme d'installation complet, qui installera XAMPP.

* Extrayez le fichier dans le dossier souhaité. La méthode recommandée consiste à extraire le fichier dans <code>C:</code> ; ianseo se trouvera alors dans <code>C:\ianseo</code>. 

* Exécutez le fichier <code>setup_xampp.bat</code>, disponible dans le dossier. Une fenêtre de terminal s'ouvrira : si certains paramètres doivent être ajustés, le système affichera deux questions préremplies ; il suffit d'appuyer sur « Entrée ». Sinon, un message indiquant « Nothing to do » s'affichera. Fermez ensuite la fenêtre du terminal.

<div class="ianseo-alert-info">
<div class="mw-collapsible mw-collapsed">
==== Après l'installation ====
<b>Sous Windows 11</b>, Windows Defender interfère apparemment avec XAMPP et provoque parfois le plantage d'i@nseo.

<div class="mw-collapsible-content">

{{Install_Post_Installation}}

</div>
</div>
</div>

==== Exécuter XAMPP ====

Après avoir configuré les fichiers extraits, lancez XAMPP en cliquant sur l'icône Xampp-control, puis, dans la nouvelle fenêtre, cliquez sur « Start » pour **Apache** et MySQL.

<div class="ianseo-alert-danger">
=====AVERTISSEMENT=====

Si un avertissement apparaît indiquant que **VCRUNTIME140.dll** est introuvable, veuillez installer la [https://learn.microsoft.com/en-us/cpp/windows/latest-supported-vc-redist?view=msvc-170#latest-microsoft-visual-c-redistributable-version dernière version de Microsoft Visual C++ Redistributable]. Nous recommandons la version **x86**. En cas de doute, installez les deux !

</div>

Remarque : le panneau de contrôle XAMPP peut être fermé (ou réduit) et les services continueront de fonctionner.

Vérifiez que le dossier <code>C:\ianseo\htdocs</code> est accessible en écriture par tous : faites un clic droit sur le dossier, sélectionnez **Propriétés**, puis modifiez les autorisations afin que tout le monde dispose des droits de lecture et d'écriture sur ce dossier ainsi que sur tous les fichiers et sous-dossiers qu'il contient.

<hr>

===MacOs===
Nous ne disposons pas d'un programme d'installation pour Mac ; la pile AMP doit donc être installée séparément.

==== Téléchargement de XAMPP/MAMP ====

Téléchargez XAMPP ([https://www.apachefriends.org/]) ou MAMP ([https://www.mamp.info/en/downloads/]) et suivez les instructions d'installation. Le guide suivant est basé sur MAMP, mais il est également valable pour XAMPP.

<div lang="en" dir="ltr" class="mw-content-ltr">
Choose the appropriate version if you're running an Intel processor or Apple Silicon.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
Run the installation program. This will install MAMP and a demo version of MAMP Pro. Ianseo only needs the functionality in MAMP so you do not need to purchase MAMP Pro unless you want to.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
After the installation, you will find a folder called MAMP in the Applications folder. Open this folder by double clicking on it and then start the MAMP application.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
Most of the standard values are sufficient for Ianseo, but a couple of adjustments need to be done first. Choose Preferences and then the Ports tab. Click the button “80 & 3306” to set MAMP to the default ports for web and MySQL.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
====Download of i@nseo====
From [https://ianseo.net/Releases.php ianseo.net] download the zip file and extract it in the folder <code>htdocs</code> of XAMPP/MAMP (under <code>/Application</code>)
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
For the purpose of the guide Ianseo will be installed in its own folder, called ianseo and the URL to access ianseo will be <code>http://localhost/ianseo</code>.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
* Open folder “/Applications/MAMP/htdocs”
* Create a folder inside it and name it “ianseo” (all lower case, without quotes)
* Uncompress the contents of the downloaded zip file inside the ianseo folder
* '''IMPORTANT:''' Open the folder <code>/Applications/MAMP/htdocs/ianseo/Common</code> and delete the file <code>config.inc.php</code> (if it exists) to allow the installation procedure to start.
* Open a terminal window (Applications -> Utilities -> Terminal)
* Go to the MAMP folder by type the command below, including a space between cd and /, and press <code>Enter</code>:
    cd /Applications/MAMP/htdocs
* Type the following command and press <code>Enter</code>. You will be asked the password of your user: enter it but remember that nothing will be displayed while typing, not even *.
    sudo chown -R nobody:admin ianseo
* Type the following command and press Enter (again it can ask for the password):
    sudo chmod -R a+rwX ianseo
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
====Starting MAMP====
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
Start the MAMP application and then press the Start button. This will start the Apache web server and the MySQL database. You may be prompted to enter your password; enter it to continue.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
Once MAMP starts, your browser should automatically open to a Welcome to MAMP page showing the current version number.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
To start Ianseo, enter the address <code>http://localhost/ianseo</code> in a new tab. You will first need to agree to the License Agreement. Check the box and click on the I AGREE button.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
If this is a new installation, follow the onscreen instructions.
</div> 

<div lang="en" dir="ltr" class="mw-content-ltr">
{{Note|During installation, MAMP does not set the MySQL root password, so when the installer will ask for it, leave it blank. The other fields can be left with default values. Click the Create user and database button to proceed. }}
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
{{Note|If the installation program displays an error message indicating that it could not connect to the database, enter “root” in the ADMIN Password to create users and databases fields and click the Create user and database button to try again.}}
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
Once the database information is configured, you should see a message saying Ianseo is now installed on your system.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
Click on the link “Go to IANSEO!” to update your system to the latest version. This will automatically download the latest version of the software and update the language files. When this is finished you will see the message “The upgrade process is finished.”. Click the button to continue.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
<hr>
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
===Linux===
The native way of installing the AMP stack is called LAMP: be aware that i@nseo will run on php 8 or later. Install with your package manager (you will need administrative privileges):
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
*apache2
*mysql-server
*mysql-client
*php
*php-mysql
*php-gd
*php-curl
*imagemagick
*php-imagick
*php-xml
*php-zip
*php-intl
*php-mbstring
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
Create a user for ianseo in the mysql server. This can be done in modern debian derived distribution with (copy and paste the following line in a terminal):
 sudo mysql -e "create user ianseo@localhost identified by 'ianseo';grant all privileges on ianseo.* to ianseo@localhost;create database ianseo;"
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
If you have an error of missing password, you need to add the password switch. Be aware that you will not see the password as you type, so don't forget to hit "enter" when done.
</div>

 <div lang="en" dir="ltr" class="mw-content-ltr">
sudo mysql -p -e "create user ianseo@localhost identified by 'ianseo';grant all privileges on ianseo.* to ianseo@localhost;create database ianseo;"
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
Create the folder <code>/opt/ianseo</code> and assign the folder to your user.
Download the zip file from [https://ianseo.net/Releases.php ianseo.net] and extract in <code>/opt/ianseo.</code>
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
Assign world writeable permissions to the folder and files with the following command.
 sudo chmod -R a+rwX /opt/ianseo
Copy the apache configuration file located in <code>/opt/ianseo/Install/apache-ianseo.conf</code> in <code>/etc/apache2/conf-available</code> and enable the change in apache
 sudo cp  /opt/ianseo/Install/apache-ianseo.conf /etc/apache2/conf-available
 sudo a2enconf apache-ianseo
 sudo service apache2 reload
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
==Final Setup of i@nseo==
Check there is no file in <code>Common</code> called <code>config.inc.php</code>
Open an Internet browser and navigate to <code><nowiki>http://localhost/ianseo</nowiki></code>
</div> 

<div lang="en" dir="ltr" class="mw-content-ltr">
Follow the on-screen instructions given by the software.
{{Content}}
</div>