Tips and Tricks - Revision history

Rpotts: /* Removing archers from the Match play */

2026-06-11T21:36:09Z

Removing archers from the Match play

← Older revision		Revision as of 21:36, 11 June 2026
Line 4:		Line 4:
	* Did not Start		* Did not Start
	** If the Archer did not start the qualification rounds you can:		** If the Archer did not start the qualification rounds you can:
	*** 1. Delete them from the participants list or;		*** 1. Delete them from the participants list (which is usual at a national level where it does not matter if they are shown) or;
	*** 2. Go to <code>Qualification => Input Score => Standard Table</code> and click <code class="button">Set</code> and then click 'Did Not Start' this will then give them a status of DNS in any printout and they will not proceed to the check shoot off screen as they are not a valid athlete.		*** 2. Go to <code>Qualification => Input Score => Standard Table</code> and click <code class="button">Set</code> and then click 'Did Not Start' this will then give them a status of DNS in any printout and they will not proceed to the check shoot off screen as they are not a valid athlete.
	** If the Archer stops during the qualification round (Did not finish):		** If the Archer stops during the qualification round (Did not finish):
	*** 1. Go to <code>Qualification => Input Score => Standard Table</code> and click <code class="button">Set</code> and then click 'Did Not Finish - No Rank' this will remove the archer from qualifying for the head to head but their score will show in printouts as valid until the point they went home.		*** 1. Go to <code>Qualification => Input Score => Standard Table</code> and click <code class="button">Set</code> and then click 'Did Not Finish - No Rank' this will remove the archer from qualifying for the head to head but their score will show in printouts as valid until the point they went home.
Line 11:		Line 11:
	{{Note\|type=warn\|text=It is best practice to run the 'Recalculate Final Rank' option from <code>Qualification => Input Score => Standard Table</code> after doing any of these actions to make sure they are correctly indicated, or removed, in any result}}		{{Note\|type=warn\|text=It is best practice to run the 'Recalculate Final Rank' option from <code>Qualification => Input Score => Standard Table</code> after doing any of these actions to make sure they are correctly indicated, or removed, in any result}}

	It is important to note that the archers in either of these states are still counted against the total number of qualifying archers for the Head to Heads. if you need to take them out of the total count then go to <code>Participants => List Simple</code> double click on the archer and set the 'Individual Events' to 'No' and they will be removed. This means that the automatic target assignment will now not consider these archers at all and you can re-plan a head to head field if needed.		It is important to note that the archers in either of these states are still counted against the total number of qualifying archers for the Head to Heads. if you need to take them out of the total count then go to <code>Participants => List Simple</code> double click on the archer and set the 'Individual Events' to 'No' and they will be removed. This means that the automatic target assignment will now not consider these archers at all and you can re-plan a head to head field if needed, but again you will need to ensure you recalculate the final and distance ranks to make sure they have been removed correctly.
	{{Content}}		{{Content}}

Rpotts: /* Removing archers from the Match play */

2026-05-21T07:18:56Z

Removing archers from the Match play

← Older revision		Revision as of 07:18, 21 May 2026
Line 11:		Line 11:
	{{Note\|type=warn\|text=It is best practice to run the 'Recalculate Final Rank' option from <code>Qualification => Input Score => Standard Table</code> after doing any of these actions to make sure they are correctly indicated, or removed, in any result}}		{{Note\|type=warn\|text=It is best practice to run the 'Recalculate Final Rank' option from <code>Qualification => Input Score => Standard Table</code> after doing any of these actions to make sure they are correctly indicated, or removed, in any result}}

	It is important to note that the archers in either of these states are still counted against the total number of qualifying archers for the Head to Heads. if you need to take them out of the total count then go to <code>Participants => List Simple</code> double click on the archer and set the 'Individual Events' to 'No' and they will be removed. This means that the automatic target assignment will now not consider these archers at all and you can re-plan a field if needed.		It is important to note that the archers in either of these states are still counted against the total number of qualifying archers for the Head to Heads. if you need to take them out of the total count then go to <code>Participants => List Simple</code> double click on the archer and set the 'Individual Events' to 'No' and they will be removed. This means that the automatic target assignment will now not consider these archers at all and you can re-plan a head to head field if needed.
	{{Content}}		{{Content}}

Rpotts: /* Removing archers from the Match play */

2026-05-20T10:21:15Z

Removing archers from the Match play

← Older revision		Revision as of 10:21, 20 May 2026
Line 6:		Line 6:
	*** 1. Delete them from the participants list or;		*** 1. Delete them from the participants list or;
	*** 2. Go to <code>Qualification => Input Score => Standard Table</code> and click <code class="button">Set</code> and then click 'Did Not Start' this will then give them a status of DNS in any printout and they will not proceed to the check shoot off screen as they are not a valid athlete.		*** 2. Go to <code>Qualification => Input Score => Standard Table</code> and click <code class="button">Set</code> and then click 'Did Not Start' this will then give them a status of DNS in any printout and they will not proceed to the check shoot off screen as they are not a valid athlete.
	** If the Archer stops during the qualification round:		** If the Archer stops during the qualification round (Did not finish):
	*** 1. Go to <code>Qualification => Input Score => Standard Table</code> and click <code class="button">Set</code> and then click 'Did Not Finish - No Rank' this will remove the archer from qualifying for the head to head but their score will show in printouts as valid until the point they went home.		*** 1. Go to <code>Qualification => Input Score => Standard Table</code> and click <code class="button">Set</code> and then click 'Did Not Finish - No Rank' this will remove the archer from qualifying for the head to head but their score will show in printouts as valid until the point they went home.

Rpotts: /* Removing archers from the Match play */

2026-05-20T10:12:27Z

Removing archers from the Match play

← Older revision		Revision as of 10:12, 20 May 2026
Line 9:		Line 9:
	*** 1. Go to <code>Qualification => Input Score => Standard Table</code> and click <code class="button">Set</code> and then click 'Did Not Finish - No Rank' this will remove the archer from qualifying for the head to head but their score will show in printouts as valid until the point they went home.		*** 1. Go to <code>Qualification => Input Score => Standard Table</code> and click <code class="button">Set</code> and then click 'Did Not Finish - No Rank' this will remove the archer from qualifying for the head to head but their score will show in printouts as valid until the point they went home.

	{{Note\|type=warn\|text=~~If you carry out any of these at the end of the qualification round it~~ is best practice to run the 'Recalculate Final Rank' option from <code>Qualification => Input Score => Standard Table</code>}}		{{Note\|type=warn\|text=It is best practice to run the 'Recalculate Final Rank' option from <code>Qualification => Input Score => Standard Table</code> after doing any of these actions to make sure they are correctly indicated, or removed, in any result}}

	It is important to note that the archers in either of these states are still counted against the total number of qualifying archers for the Head to Heads. if you need to take them out of the total count then go to <code>Participants => List Simple</code> double click on the archer and set the 'Individual Events' to 'No' and they will be removed. This means that the automatic target assignment will now not consider these archers at all and you can re-plan a field if needed.		It is important to note that the archers in either of these states are still counted against the total number of qualifying archers for the Head to Heads. if you need to take them out of the total count then go to <code>Participants => List Simple</code> double click on the archer and set the 'Individual Events' to 'No' and they will be removed. This means that the automatic target assignment will now not consider these archers at all and you can re-plan a field if needed.

Rpotts: /* Removing archers from the Match play */

2026-05-20T10:11:43Z

Removing archers from the Match play

← Older revision		Revision as of 10:11, 20 May 2026
Line 8:		Line 8:
	** If the Archer stops during the qualification round:		** If the Archer stops during the qualification round:
	*** 1. Go to <code>Qualification => Input Score => Standard Table</code> and click <code class="button">Set</code> and then click 'Did Not Finish - No Rank' this will remove the archer from qualifying for the head to head but their score will show in printouts as valid until the point they went home.		*** 1. Go to <code>Qualification => Input Score => Standard Table</code> and click <code class="button">Set</code> and then click 'Did Not Finish - No Rank' this will remove the archer from qualifying for the head to head but their score will show in printouts as valid until the point they went home.

			{{Note\|type=warn\|text=If you carry out any of these at the end of the qualification round it is best practice to run the 'Recalculate Final Rank' option from <code>Qualification => Input Score => Standard Table</code>}}

	It is important to note that the archers in either of these states are still counted against the total number of qualifying archers for the Head to Heads. if you need to take them out of the total count then go to <code>Participants => List Simple</code> double click on the archer and set the 'Individual Events' to 'No' and they will be removed. This means that the automatic target assignment will now not consider these archers at all and you can re-plan a field if needed.		It is important to note that the archers in either of these states are still counted against the total number of qualifying archers for the Head to Heads. if you need to take them out of the total count then go to <code>Participants => List Simple</code> double click on the archer and set the 'Individual Events' to 'No' and they will be removed. This means that the automatic target assignment will now not consider these archers at all and you can re-plan a field if needed.

Rpotts at 10:09, 20 May 2026

2026-05-20T10:09:25Z

← Older revision		Revision as of 10:09, 20 May 2026
Line 1:		Line 1:
	{{Page in progress}}		{{Page in progress}}
	~~''''~~Removing archers from the Match play~~''''~~		===Removing archers from the Match play===
	It can happen in competition you get some different scenarios in qualification where you do not want an archer to continue to the Match Play, but you do want to still show them in the final reports. We will discuss the different scenarios here.		It can happen in competition you get some different scenarios in qualification where you do not want an archer to continue to the Match Play, but you do want to still show them in the final reports. We will discuss the different scenarios here.
	* Did not Start		* Did not Start

Rpotts at 10:09, 20 May 2026

2026-05-20T10:09:11Z

← Older revision		Revision as of 10:09, 20 May 2026
Line 1:		Line 1:
	{{Page in progress}}		{{Page in progress}}
		⚫	''''Removing archers from the Match play''''

⚫	{{Content}}
⚫	'''Removing archers from the Match play'''
	It can happen in competition you get some different scenarios in qualification where you do not want an archer to continue to the Match Play, but you do want to still show them in the final reports. We will discuss the different scenarios here.		It can happen in competition you get some different scenarios in qualification where you do not want an archer to continue to the Match Play, but you do want to still show them in the final reports. We will discuss the different scenarios here.
	* Did not Start		* Did not Start
Line 11:		Line 9:
	*** 1. Go to <code>Qualification => Input Score => Standard Table</code> and click <code class="button">Set</code> and then click 'Did Not Finish - No Rank' this will remove the archer from qualifying for the head to head but their score will show in printouts as valid until the point they went home.		*** 1. Go to <code>Qualification => Input Score => Standard Table</code> and click <code class="button">Set</code> and then click 'Did Not Finish - No Rank' this will remove the archer from qualifying for the head to head but their score will show in printouts as valid until the point they went home.

	It is important to note that the archers in either of these states are still counted against the total number of qualifying archers for the Head to Heads. if you need to take them out of the total count then go to <code>Participants => List Simple</code> double click on the archer and set the 'Individual Events' to 'No' and they will be removed. This means that the automatic target assignment will now not consider these archers at all and you ~~cna~~ re-plan a field if needed.		It is important to note that the archers in either of these states are still counted against the total number of qualifying archers for the Head to Heads. if you need to take them out of the total count then go to <code>Participants => List Simple</code> double click on the archer and set the 'Individual Events' to 'No' and they will be removed. This means that the automatic target assignment will now not consider these archers at all and you can re-plan a field if needed.
		⚫	{{Content}}

Rpotts at 10:08, 20 May 2026

2026-05-20T10:08:54Z

← Older revision		Revision as of 10:08, 20 May 2026
Line 2:		Line 2:

	{{Content}}		{{Content}}
			'''Removing archers from the Match play'''
			It can happen in competition you get some different scenarios in qualification where you do not want an archer to continue to the Match Play, but you do want to still show them in the final reports. We will discuss the different scenarios here.
			* Did not Start
			** If the Archer did not start the qualification rounds you can:
			*** 1. Delete them from the participants list or;
			*** 2. Go to <code>Qualification => Input Score => Standard Table</code> and click <code class="button">Set</code> and then click 'Did Not Start' this will then give them a status of DNS in any printout and they will not proceed to the check shoot off screen as they are not a valid athlete.
			** If the Archer stops during the qualification round:
			*** 1. Go to <code>Qualification => Input Score => Standard Table</code> and click <code class="button">Set</code> and then click 'Did Not Finish - No Rank' this will remove the archer from qualifying for the head to head but their score will show in printouts as valid until the point they went home.

			It is important to note that the archers in either of these states are still counted against the total number of qualifying archers for the Head to Heads. if you need to take them out of the total count then go to <code>Participants => List Simple</code> double click on the archer and set the 'Individual Events' to 'No' and they will be removed. This means that the automatic target assignment will now not consider these archers at all and you cna re-plan a field if needed.

Deligant at 07:07, 1 July 2025

2025-07-01T07:07:03Z

← Older revision		Revision as of 07:07, 1 July 2025
Line 1:		Line 1:
	{{Page in progress}}		{{Page in progress}}

			{{Content}}

Deligant: Created page with "{{Page in progress}}"

2025-03-21T14:58:58Z

Created page with "{{Page in progress}}"

New page