Competition/Edit Competition Info/it

Info Gara

Modifica Dati Gara

Torneo => Modifica Dati Gara => Info Gara mostrerà la stessa pagina di Creare una gara, ma con un campo in più:

• Tabella di ricerca: Alcune Federazioni hanno deciso di aiutare gli organizzatori consegnando una lista regolarmente aggiornata dei loro arcieri, compresa la loro attuale società/nazione e la divisione di tiro preferita. Nel caso in cui questa tabella di ricerca venga modificata dopo che alcuni atleti sono già stati inseriti, un Imposta tutti gli iscritti a: XXX pulsante apparirà per allineare tutti gli iscritti a quella tabella di ricerca. La tabella è popolata da Aggiornamento Arcieri.

In fondo alla pagina una serie di link daranno accesso alle impostazioni di base da controllare:

• Gestione dei Turni di Tiro
• Gestione del Personale sul Campo
• Gestione delle Immagini
• Gestione Divisioni e Classi
• Gestione Categorie
• Parametri Avanzati

Immagini

Gestione delle Immagini del Torneo

Torneo => Modifica Dati Gara => Immagini porterà a una pagina in cui è possibile inserire i loghi in alto a sinistra, in alto a destra e il banner in basso. I risultati migliori per le immagini in alto a sinistra e a destra si ottengono con loghi quadrati.

The Main Institution logos should be placed top right, while the Competition logo should be placed top left.

Bottom banner is usually used for advertising sponsors and partners. It will be resized to be 1 cm high (0.39 inches), so take this into account when creating the bottom banner. The width of the bottom banner for A4 should be 19 cm (7.48 inches), 20 cm (7.87 inches) for Letter.

Accepted formats are PNG (preferred for better printouts) and JPG, maximum size is 256KB.

Remember to remove transparency if using PNG images!

Turno

Torneo => Modifica dati Gara => Turno La pagina imposta il numero di turni di tiro e il loro programma. I turni di tiro possono essere uno dopo l'altro (come in molte gare indoor) o simultanei (come in una gara Campagna o 3D con campi multipli) o un mix dei due.

Session Management - Top part

Top part: Session definition

On the top part, after selecting the number of sessions (up to 9), the number of butts per session and archers per butt need to be set. If only 2 archers per butt are set, one can choose if they will shoot "AB" (at the same time) or "AC" (one per line) or "AD" (one per line on each side of the butt).

Don't forget to save your setup!

Advanced Session Management

Advanced

The :Advanced: link leads to a page where some details of each session can be adjusted. The main "Session" page was referring to the "Qualification" part of the competition, in the advanced page the "session" is more related to the shooting moments of the competition: qualification, elimination rounds, elimination matches, medal matches, etc. The image shows an example of Qualification Sessions and Matches Sessions.

Don't forget to save your setup!

Session Management - Bottom part

Bottom part: Scheduling

On the bottom part of the page, session per session and distance per distance, some settings are mandatory:

• Ends: number of ends for the distance
• Arrows: number of arrows per end

The other fields are optional and will be used both for Scheduling and for the field layout

• Date: date the distance will be shot
• Warm Up: time when the warmup will start
• Length: duration of the warmup in minutes
• Starting Time: time when the distance will start
• Length: duration of the distance in minutes. If no values are set for the other distances, consider placing the full qualification time here.
• Schedule notes: comments that will be put in the schedule

modifications in these fields are automatically saved leaving the field: the value will change in blue or green to show the change

Advanced

Clicking on the Advanced button two more fields will appear:

• Ends to Shoot: number of ends to shoot in that distance: 0 means all
• Ends Offset: End offset from which to accept scores: 0 is the first end, 1 is the second, etc

These fields control situation like, for example, a field of 60 targets to shoot in 3 days, 20 targets per day: instead of creating scorecards with 60 lines, it is better to divide in 3 distances, the first ranging from target 1 to 20 (20 Ends to Shoot, 0 offset), the second distance from 21 to 40 (20 Ends to Shoot, 20 offset), the third distance from 41 to 60 (20 Ends to Shoot, 40 offset),

Personale sul campo

Personale sul campo

Torneo => Modifica Dati Gara => Personale sul campo apre la pagina del Personale di Campo (Giudici di Gara, Commissione di Garanzia, Responsabile dell'Organizzazione, etc). Una persona viene aggiunta compilando i seguenti campi:

• Tessera: il numero di tessera della persona (di solito il suo numero di tessera federale).
• Identificativo Locale: l'ID locale della persona, se diverso da quello della tessera.
• Cognome e Nome: nome della persona. Se una persona ha solo il patronimico, inserirlo nel campo del Cognome.
• Sesso: Al momento sono disponibili solo M(maschio) e F(femmina).
• Codice Soc.: codice società/nazione. Utilizzare i codici accettati dal CIO se si utilizzano le nazioni.
• Società: nome completo della società/paese.
• Ruolo: funzione all'interno della competizione.

Clicking on the lens will show a search popup to select people already in the competition.

At the bottom are the PDF of the officials. The one with the Olympic Rings always means Standard ORIS Printout.

Divisioni e Classi

Torneo => Modifica Dati Gara => Divisioni e Classi mostra una pagina divisa in due sezioni. Queste sono solitamente preimpostate in base al regolamento e alla tipologia di gara.

Competition Divisions

Top Part

To insert a division, input the following fields:

• Division: up to 4 characters code for the division: choose the code wisely as it is used throughout ianseo.
• Description: description of the division
• Para/IPC: defines if a division is para or not
• Athlete: defines if the division is for competing athletes or support (coaches, delegation officials, staff, media, etc)
• Order: order in which the divisions will be listed

Competition Divisions

Bottom Part

Classes are groups of archers base on age. Sometimes, an archer of one age group can shoot in another age group, as for example a U18 shooting in U21 or in an adult class. Age is the age that the person has by december 31st of the year of the competition To insert a class, input the following fields:

• Age Class: up to 4 characters code for the class: choose the code wisely as it is used throughout ianseo.
• Gender: M(ale), F(emale) or U(nisex) are the available options
• Description: description of the class
• Para/IPC: defines if a class is para or not
• Athlete: defines if the class is for competing athletes or support (type of coach, delegation officials, staff, media, etc)
• Order: order in which the classes will be listed
• From Year: minimum age (included) to be selected in this class
• To Year: maximum age (included) to be selected in this class
• Assignable Classes: the classes this class allows to switch. A comma based list of classes, containing at least itself.
• Allowed Div. (empty for all): a comma-separated list of divisions where this class is available (empty if universal)

At the very bottom of the page are two shortcuts for:

• Manage distances
• Manage SubClasses

Categorie

Gestione Categorie

Torneo => Modifica Dati Gara => Categorie offre la possibilità di creare una serie di Categorie per classificare ulteriormente una determinata Classe/Divisione in sottogruppi. Di solito si tratta delle "categorie di merito" degli arcieri o dei raggruppamenti.

Manage Distances

Distance Management

Competition => Edit Competition Info => Manage Distances shows the distance management for each and every athlete category.

• Filter on Division/Class: this field must be written so that no category (archer's division and class) can be chosen by two or more filters. Some jolly characters can help reduce the number of rows and group some categories that shoot at the same distance:
  • "_" (underscore): this matches exactly one single character, so "OL_" will match "OLM" "OLF" but not "OLU18"
  • "%" (percent): this matches any sequence of characters. The most basic filter would be a single "%" sign to match all categories, if all shoot at the same distances. "C%" will match all categories starting with "C".

• .1., .2., .3.: for each distance, insert the specific name for that distance. Eg: "18m-1", "Unknown", "Marked",...

If you suddenly have duplicate archers for a given category, most likely you have overlapping definitions in the filter: edit them to remove the inconsistency

At the bottom of the page you have again an editable reminder of the Sessions scheduling.

Manage Targets

Targetface Management

Competition => Edit Competition Info => Manage Targets allows the definition of target faces (default and optional) for the categories and distances.

It is not recommended to change the default values.

• Name: Name of the target face. Once saved, editing the target definition gears appear, clicking which a subform appears where some items might be defined if different than the global values (set in the Advanced Parameters):
  • Gold Label: how to call the Gold (first tie breaker). Usually "10+X" in target archery or "10" in indoors
  • XNine Label: how to call the XNines (second level tie breaker). Ususally "X" in target archery and "9" in indoors
  • Points as Gold: Points to count as Golds (First level tie breaker). Usually X,10 in target, 10 in indoors
  • Points as XNine: Points to count as XNine (Second level tie breaker). Usually X in target, 9 in indoors
• Filter on Division/Class: This filter is the combination of Division and class to match the category of the athlete. Two characters can be used as jolly:
  • "_" (underscore): matches a single character. So "C_" will match "CM" and "CF" but not "CMW"
  • "%" (percent): matches any number of characters. The most basic filter is "%" that will match every category. "BB%" will match "BBM" as well as "BBU21W" but not "BW" nor "MBB2"
• Filter on Division/Class (RegExp): this field is restricted to advanced users and allows to use [[1]] (Regular Expressions) to match more in detail several categories at once
• .1., .2., .3., ...: For each distance select a target type and a diameter. After saving a target definition, upon editing a gear appears, to specify more in detail the 2 tie breakers that might be defined if different than the global values (set in the Advanced Parameters) or the Target face specific values.
• Set as default: Check to define this target as the default target for the categories selected by the filter

The same category can be selected by more than one filter allowing an archer to select among multiple target faces, eg indoors full target or triple

Advanced Parameters

Advanced Parameters

This page is not referenced in the menu, as the settings are critical and once set must not be tampered with.

Change the values in here only if you know what you're doing!

• # Distances: number of distances of the qualification round. Eg 1440 Round has 4 distances, standard indoors have 2 distances.
• # Ends: number of ends (of 3 arrows) per distance.
• Max Distance Score: maximum score per distance. Calculated based on [max score per target]*[Ends]*3
• Max Individual Final Score: maximum score in an individual match
• Max Team Final Score: maximum score in a team match ([max score per target]*[team ends]*[team arrow per end])
• Tournament Category: type of tournament
• Team Elaboration Mode: team composition type. Valid only for "Regular teams" as opposed to "Events Teams"
• Eliminations: presence of an individual elimination round between qualification and matches
• Gold Label: global fallback description for the first level tiebreak
• XNine Label: global fallback description for the second level tiebreak
• Points as Gold: comma-separated list of points used to elaborate the first level tiebreak
• Points as XNine: comma-separated list of points used to elaborate the second level tiebreak
• Double: defines if the competition is a double or not, eg double 70m round, 25+18 indoor, etc