Competition/Individual Events Setup/sv

Det här är inställningssidan. Klicka på Inställningar finaler för att gå till inställningar

Planering av individuella finaler minskar risken för misstag och gör resultathanteringen enklare, särskilt om ISK-NG är tänkt att användas.

Hantera finaler

Lista över individuella finaler

Tävling => Individuella finaler – inställningar => Hantera finaler visar listan över individuella finaler.

• Finalkod: finalens kod. Det är den kod som används i hela i@nseo. När den har sparats blir den en knapp för att ändra vilka kategorier och eventuella subklasser som är behöriga att skjuta den här finalen (se #Val av finalkategori).
• Finalnamn: beskrivning av finalen
• Para/IPC: markera för att aktivera som para-final
• Ordning: i vilken ordning finalen listas
• Elimineringar: typ av eliminering. Se #Elimineringstyper
• Matchpoäng: välj poängformat (ackumulerat eller set-system) för finalen
• Första fas: välj första fas för stegen i den här finalen. Kontrollera gärna med Participants#Statistics för att sätta korrekt startfas utifrån faktiskt antal deltagare. Välj "--" (ingen startfas) för att skapa finaler utan steg.
• Tavltyp: välj rätt tavltyp för den här finalen
• ø (cm): tavlans diameter (i cm)
• Avstånd: skjutavstånd. Kan vara 0 för finaler där avståndet varierar mellan faser eller serier.
• Knappen Skapa/radera finalklasser baserat på deltagare skapar eller tar bort finaler baserat på kategorier som inte ingår i någon final, eller tar bort finaler där inga behöriga skyttar finns.

Event Category Selection

Category Selection

Category and eventual subclass eligibility is defined in this page. Select which categories are eligible. Multiple selections are made with CTRL+Click. Default is no subclass filter, it must be enabled manually to be used.

Advanced

Category Selection, Advanced

The Advanced button opens some extended fields. These values are critical for the correct behaviour of the event results:

• Number of Athletes/Teams to Select: automatically calculated based on the starting phase, can be changed to reduce the selection only: top ranked archers will have a bye
• Rank of First Athlete/Team to Select: usually "1" for regular brackets, can be set to another value, for example to manage secondary competitions with lower ranked archers
• Is a Medal Event: selects if the event will be awarded
• Event's Winner Final Rank: set this to the first ranked after the event is finished. Should be the same as Rank of first athlete
• Parent Event Code: If this event is a child of another event, then leave the category selection above empty as the opponents will be the dropout/winner of the parent event
• Select Winners of Parent Event: if Parent Event Code is selected, defines if the event will be populated by the dropouts (default) or the winners of previous events
• Gold Label: Label to set for the first level tie breaker
• XNine Label: Label to set for the second level tie breaker
• Points as Gold: Points to be retained to calculate the first level tie breaker
• Points as XNine: Points to be retained to calculate the second level tie breaker
• Check Golds in Ties: Establishes if ties should be break based on the first tie breaker
• Check XNine in Ties: Establishes if ties should be break based on the second tie breaker
• Ranking AFTER following distance: Usually set as "last", can be changed to accommodate specific needs of the competition format
• WA Category: Equivalence between this event and the WA category if any

Elimination Types

Elimination Types

Defaults to "Regular brackets", but can be changed to other types of elimination.

Changing this value will litterally kill the previous elimination type references and matches and recreate the all items needed to manage results for this new type.

1(2) Elim.Round

Intermediate Elimination Rounds Setup

This kind of elimination will place 1 or 2 intermediate rounds before placing qualified archers into the final brackets. Some fields need to be entered or verified for each round:

• Archers: Number of archers to select
• Ends: number of ends to shoot
• Arrows: number f arrows per end
• Shoot Off: SO arrows

World Games(Archery) Pools

World Games/Archery Pools Setup

This kind of elimination prepares 2/4 Shoot Up pools where athletes ranked 3 or more after qualification will be placed, with (WG) or without (WA) beauty match between first and second ranked. As usual some fields need to be entered or verified:

• Archers: Number of archers to be placed in the pools
• Ends: number of ends to shoot
• Arrows: number f arrows per end
• Shoot Off: SO arrows

Round Robin

Round Robin Event Setup

Round Robin global setup for this event only need to set how many "waves" of Round Robin matches will be held until placing archers in the final brackets (if any).

• Levels: number of Round Robin levels will be held (see Round Robin for the complete setup)

Archers on Targets

Target and Phase Opponents Setup

This page shows a comprehensive table of how many archers per target are set for all the phases of the event. It also establishes if matches will be shot in a single wave or in two waves. {{Note|text=A selector enables an easy switch between Individual and Team setup, as well as switch between Opponents per Target and Manage Phase's Arrows per Set

Arrows per Set

Arrows and Ends Setup

Fields need to be checked, especially when creating new events. Each event has 2 lines, one for "Elimination" phases (up to 1/8 included) and one for "Finals" phases (1/4, 1/2, Medals) as ends and arrows per end might change between the 2. Blue and Green dots will show how the phases will be shot.

Targets Number

Target Assignment for Grids

First select the event to work on. A grid will appear based on the selections set in #Archers on Targets: One field for both opponents if 2 archers per target (they will be assigned as 1A and 1B), one field per opponent if one archer per target. There are some shortcuts to ease the target assignment. This setup is mandatory in case of:

• ISK-NG is planned for electronic scoring
• Field of Play printout for field management
• Athletes Sheets with assigned target box in case of win

Scheduling

Match Scheduling

As before, first select the event to work on. A grid will appear where information can be inserted for every match or globally for a whole phase. Each Phase has at the top the fields to insert a date (format day-month-year), a time and an optional duration of the match. Once set, clicking on Set To All will fill all matches in that phase with the same value. After the very first schedule has been done, a dropdown menu will also appear, filled in by all the scheduled matches already set. From the following phase a shortcut is offered to speed up the process: inserting "+" and the number of minutes of offset in the "time" field and a duration, clicking on "Set to all" will automagically calculate the correct time and fill in the whole phase. It is also possible to select an already planned schedule from the drop down selector and click on "set to all". This setup is mandatory in case of:

• ISK-NG Pro/Live is planned for electronic scoring
• Field of Play printout for field management

Warm Up Schedule

See Competition/Warm_Up_Schedule

Manage Running Events

Running Events Management

Sometimes the gathering of scoring (manual or electronic) is not at the same end for everybody: competitions with categories shooting over multiple sessions, Field, 3D, ISK-NG in lite mode. This pages comes in handy as it calculates (and shows) results as average arrow points up to 3 decimals.

The first column of each Round shows the lowest and highest arrows shot for each event.

It is important to have Participants#IRM correctly set up in order to have consistency on these numbers

Main I@nseo Menu Bar

• Install i@nseo
• Update i@nseo
• Competition
• Participants
• Qualification
• Round Robin
• Individual Finals
• Team Finals
• Printout
• ISK
• Output
• Modules
• Tips and Tricks
• Common Issues